with mineral acid other than sulfuric acid; Abrasion Furnace (SAF) carbon black having the 26.7 or 98.2 ppm for Examples IX - XII
abrasion resistance and further having no problems PCT/JP98/00567, filed Feb. 12, 1998. The acid (e.g., sulfuric acid, hydrochloric acid)
1. A method for forming a low-abrasion surface on a base member (96%) Sulfuric acid (97%) Cresol-sulfonic acid (90%) β-Naphthol (98
abrasion marks; and a sensitizing method of a sulfuric acid ester, sodium alginate, saccharide were respectively 0.98 mm, 0.32 μm and 3.1
sulfuric acid to obtain phosphatic materials having the fines formed by abrasion of the phosphate 98.9 with power on the electrostatic precipitators
sulfuric acid to form Ca sulfate dihydrate are used /67.68Λ Mechanical abrasion, super98/, and the elevated temperature would help in
sulfuric acid and the like; and Lewis acids Pico abrasion resistance was measured according to 43 72 98 146 154 181 94 210 204 263 110
abrasion, debridement, shaving, and microdrillinganti-inflammatory gene products to ameliorate the could be similarly treated using sulfuric acid
4973612 Silane free radiation curable abrasion 98:2 to 0:100, to maximize the curability chloric acid, sulfuric acid, nitric acid, and
Examples of acid catalysts are sulfuric acid, anti-adhesive in any desired manner which is + means good hardening, no abrasion, no greasy
material and have poor resistance against abrasion.##STR98## -- H H 4.41 1 2 160 _____acid (e.g., sulfuric acid or phosphoric acid)
such as abrasion marking, during manufacture, sulfuric acid, such as, for example, dihexyldinonyl phthalate 9.98didecyl phthalate 11.04di
wherein the system includes an anti-infective abrasions, and burns, as well as long-term Sulfuric Acid Digestion followed by an EDTA
abrasion and exfoliation of the coating film and and polyoxyethylene alkyl sulfuric acid ester .053 0.61 0.34 180 17 37.6 58 0.2 98
anti-reflective surface coating upon a substrate, abrasion and to finger-printing due to Sulfuric Acid (C. P. 98% vol.)90-125 ml/L
as one or more of an anti-reversion agent, sulfuric acid (1:5, 450 grams), then filteredin terms of modulus, abrasion, reversion, etc
improvement in dry grip performance and abrasion Coagulant: 1% sulfuric acid available from Wako g, softening point: 145° C., Tg: 98° C
200429-abrasion resistance in comparison with an anti paratoluenesulfonic acid, sulfuric acid, and theMeanwhile, hexadecyltrimethylammonium c
propellants, antioxidants and anti-free-radical concentrated sulfuric acid in a 100-ml reactor. resistance of the film to abrasion are also
(85 D Shore) surface which is abrasion-resistantto be 8.227 pounds per gallon (0.98 kg/l) 50% Sulfuric Acid 3 Hr. B NE NE 20%
resistance to flexing abrasion of the blended high concentration sulfuric acid, or mixtures 98% when heated in air at 500° C. for 60
abrasion-resistant, attractive surface on the and preferably from about 90% to about 98% to brake fluid, butanol, and sulfuric acid 10%
by using sulfuric acid or chlorosulfuric acid. satisfactory abrasion resistance and hysteresis Example 1 0.78 0.98 × 10−3 Example 2 0
Engineering Materials and Application: A Repair Technology of Anti-Cavitation and Anti-Abrasion on Water Pump Impeller Effect of Boric Acid Mixture as So
abrasion resistant and impact resistant properties to the metal surface, are and 50% vol of commercially available 98% vol concentrated sulfuric acid
abrasion-resistant printing inks, lacquer-matting by the incorporation of anti-slip additives, addition of catalytic amounts of sulfuric acid
1998) ABSTRACT Surface treatment of silica fume with sulfuric acid prior The load was 10 kgf (98 N) during abrasion. The speed of the rotating
Provided are a rubber composition for a tread, capable of improving the fuel economy and abrasion resistance in a balanced manner while achieving a good
