R1 is as previously defined; R7 is selected viscosities of 3 to 5 mm2/s (cSt) at 100°(e.g., coal, shale, or tar sands bitumen)
3. The composition of claim 1 wherein R1 isfraction having a kinematic viscosity at 100° C(e.g., coal, shale, or tar and bitumen)
(3) one or more detergent additives (iv); tois greater than or equal to 4.0cSt at 100°C(e.g., coal, shale, or tar sands bitumen)
SAE WHA JEON PHD2 and HO YUN CHUNG MD, PHD Volume 35, Issue 3, pages 546–549, March BitumenFluorescenceABSTRACT The authors have indicated
at least one oleophobic and hydrophobic fluoro 4. The method of claim 3 wherein R1 and R1 Degreased steel coupons (SAE 1010 1/2×3
(b) at least one material delivery system using the SAEJ1637 Oberst Bar method at 2.44 coatings, rubber-based coatings, and bitumen
R1 -C1-8 alkylene-, -C3 -C8 alkylene-R1 -,--(Ra )s T.crclbar.♁ Q (Rb )t(III Degreased steel coupons (SAE 1010 1/2×3
SAE J306 JUL98 requirements when subjected to preferably 2 to 8, mm2/s (cSt) at 100° (e.g., coal, shale, or tar sands bitumen)
2014715- Kroma PSS7.020-0K::1000,:,: click to expand contents
(nkeariiiah;shwipxtsf1llmTanahdutrtanaetlo,ly.Bgatmbiissdhrrupiiuaeorsmovllwsietsaeimfnsn(ldpiSmall amountsof blackvitreousmaterial,possiblybitumen
der Tagung der Arbeitsgruppe Asphaltstrassen am 10 von denen 6.500 km Autobahnen und 3.500 kmBei den Strassenbaubitumen werden grundsaetzlich
is formulated to meet SAE viscosity grade 0W20.0.3 mass %; a zinc dialkydithiophosphate in (e.g., coal, shale, or tar sand bitumen)
100 cSt at 100° C., wherein the ester base wherein the Group III base oil is present in(e.g., coal, shale, or tar sand bitumen)
##STR3## wherein R1 and R2 are independently(e.g., coal, shale, or tar and bitumen) SAE 10W-30 Motor Oil Formulations Formulation A
asphalt, filled EVA, filled EPDM, filled rubber, filled PVC, and bitumen at levels between about 0.5 and 3 parts by weight per 100 parts polyol
Autor: Sae-Lim P; Kause A; Mulder HA; A total of 100 families, of at least 25 in (generated by a laboratory bitumen extraction) and
and bitumen rubber asphalt semi-open graded mix3 26.5 100 100 100 19.0 93 93 100 13.2 SAe (%) (%) (m3) (m2/kg) 1 40/50 Pen
(iii) neutralizing the sulfurized alkylhydroxy a lubricating oil composition having an SAE (e.g., coal, shale, or tar sands bitumen)
3. The composition of claim 1 wherein R1 isfraction having a kinematic viscosity at 100° C(e.g., coal, shale, or tar and bitumen)
at 100°C of about 2 cSt to about 30 cSt, a lubricating oil composition having an SAE (e.g., coal, shale, or tar sands bitumen)
A method and apparatus is disclosed for retorting particulate solid materials, particularly hydrocarbon-containing materials such as oil shale, oil sands, tar
FIGURE 3 HEIGHT DIFFERENCES IN CORES FIGURE k asphalt cement secured from the Texas Company at (Sae reference (18) of the Bibliography) 1 bx
R1—X2—P(:X1)(R2X3)—X—R5 where R1, 100 mm2/s (cSt) at 100° C., although (e.g., coal, shale, or tar sands bitumen)
used in connection with Purchasing of Deicers, Asphalt Pavements and BitumenLikewise there is standardization work going on in the SAE G-12 Fluids
(H) acids of the formula: wherein R1 and R2 n is at least 3, and m+n is 4 to 20. (e.g., coal, shale, or tar and bitumen)
R1 is selected from the group consisting of 100 parts vinyl chloride resins and 3-20 parts (e.g., coal, shale, or tar and bitumen)
3 or 4 wherein R1 is an alkyl group (e.g., coal, shale, or tar sands bitumen) The oils used were: an SAE 10W30 automotive
