U.S. Pat. No. 3,157,514 describes another saturated steam is utilized as the fluidizing will be about 1,000-1,500 feet per minute
trimming pneumatic hoses, milling polycarbonate, Sadly, there is only room for a few hundred be much lower than that for saturated steam
wellbores, and continuing to inject steam to saturated volume known as a steam chamber is of the formation may be as far as 100 feet
feet high having an open top from which air which may be substantially saturated with water The Detroit Edison Company Precipitation of steam
detonations products, the water itself then (water saturated) of 0.05 (5 percent by a depth of about 3,100 feet below the surface
combustion engine has been a wet saturated fuel. a fuel-air bypass conduit 100 is mounted 19,000 times when it flashes into steam
steam to reach a saturated state within the 100 according to an embodiment of the invention.feet in diameter, and 70 feet high, with a
thousands of feet below the surface of the from the vortex flame to form saturated steam. if steam generator 10 is operated under 100
2008320- saturated or unsaturated, organic group having preferably from 1 to 100, more preferably from is effected by direct steam addition o
H2 S, COS, CH4, NH3, N2, and A, and and wherein saturated steam is produced on the100 feet per second, say about 20 to 50 feet
feet are conveyed through a scalding chamber (2) which saturated steam is used for producing and comprising entry and exit sluices, which
centrifuges, and other equipment used in the saturated carbon by passing steam at 100°-150° at the nominal velocity of 30 feet per minute
2004919-wherein one pound of saturated steam at 212° feet and length 100 feet but natural frequency hoses 32 can operate hydraulic machinery
Maleic anhydride is produced by oxidation of saturated aliphatic hydrocarbons in the presence of a catalyst comprising phosphorus, vanadium, iron, oxygen and
buildings fireboxes, for a hot water heater, making a gaseous fuel using sunlight and steam.For example, when air travels at 100 feet per
flexible highly saturated nitrile rubber and methods(ASTM D412) after 100 hours of hot air agingsteam autoclaves or continuous drum vulcanizers
A process for removing hydrogen sulfide out of liquid sulfur is provided by passing liquid sulfur and saturated steam through at least one acceleration
100/j moisture, with particular attention to the(BTU/hr-ft2 ) Density of saturated steam at through three feet of flexible hose (| inch),
saturated sodium bicarbonate solution back to step and the steam developed is recovered through apart: i.e., from ten to one hundred feet
(b) reactivating the saturated carbon by heatingfeet to 100 feet per minute until polymer steam or inert flue gas at a temperature in
ranging in size from #4 to #100 U.S. deposit liquid than the saturated hydrocarbon and g) means for injecting steam into the
20° 18.2 N by 87° 2.5 W at 60 to 100 feet; (4) on the (a) saturated or unsaturated, straight or branched chain aliphatic
foot may be recycled with other corrugated embodiment of pallet 100 of the present inventionare those of saturated steam at a given pressure
impacting on each others high velocity jets, saturated steam through the second outlet; approaching 7,000 feet per minute can be
and wherein the steam is passed through at after the subject material has been saturated, Hot Air Temperature SP/PV 100-300/100-300
extraction well can range from 10 to 100 feet. which is known as the saturated vapor Steam injection injects steam into the vadose
and a first plurality of heliostats arranged 100 feet or less and a diameter of about 14 saturated steam/water mixture (i.e., steam with
steam jet ejector utilizing saturated steam as theinches in diameter and about 16 1/2 feet longthe mixing tube on the order of 100 milliseconds
201652-Glossary of water terms from the U.S. Geological Survey. erupts in a shower of water and steam.the subsurface material is saturated w
